HP XW9400 Disassembly Instructions Manual page 2

radioactive substances
Liquid
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Torx drivers, screwdriver, diagonal cutter
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
(See instructions below in sections 3.2 and 3.3.)
EL-MF877-00
Template Revision A
Fluid in the liquid cooling unit of the optional
configurations.
438710-001
Yes
Tool Size (if
applicable)
Page 2