Advertisement
Operation Guide 5510
6. Press A to clear the stopwatch to all zeros.
Lap time
•
Lap numbers are incremented automatically starting
from 1 whenever you press A in step 3 of the above
procedure. The maximum lap number is 99.
Recording a lap after that causes the lap number
count to restart from 00.
Lap number
To measure elapsed time with split times
1. When the stopwatch display shows all zeros, press A
Lap time
to display the split time screen (indicated by
2. Press D to start an elapsed time measurement.
•
At the time, both the upper and lower displays will
show identical times.
Elapsed time
E-20
Memory Management
A new log is created each time you press D in the Stopwatch Mode to start a new
elapsed time measurement operation. A log contains a log title screen, and records of
all the lap or split times you record during the current elapsed time measurement
operation.
•
The capacity of the watch's memory is 60 records.
•
If you are adding records to the only log in memory and watch memory becomes
full, adding another record causes the oldest record in the log to be deleted
automatically to make room for the new record.
•
If you are adding records to a log when there are multiple logs in memory and
watch memory becomes full, adding another record causes the oldest log in
memory and all of its records to be deleted automatically to make room for new
records.
E-22
Recall Mode
Use the Recall Mode to recall and delete logs and records
Day of week
you stored in the Stopwatch Mode. You can use the
Recall Mode to view both lap and split time records.
Month – Day
•
When you enter the Recall Mode, the newest log
recorded in the Stopwatch Mode will appear first. If
there are no logs in memory,
display.
•
You can use the Recall Mode to check memory data
even while a stopwatch elapsed time measurement
operation is in progress. However, the time data that is
currently being measured will not appear in the Recall
Log number
Mode.
•
You can convert a lap time saved in the Stopwatch
Log Title Screen
Mode to a split time (page E-25).
E-24
First record
Lap time
Log Title Screen
Press D.
Log number
Split time
•
Whether you will be able to view lap time records or split time records will depend
on the screen you selected in step 2, above.
E-26
Countdown Timer
You can set the countdown timer within a range of one
Timekeeping Mode time
minute to 24 hours. An alarm sounds when the countdown
reaches zero.
•
You also can select auto-repeat, which automatically
restarts the countdown from the original value you set
whenever zero is reached.
•
All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
Hours
Seconds
Minutes
Auto-repeat
on indicator
E-28
/SPL).
appears on the
Last record
Lap number
Split number
3. Press A to record the time of the first split.
Split Time Recording
(Displayed for eight
•
The current split time appears in the lower display for
seconds after A is pressed.)
about eight seconds, as the total elapsed time, next
lap time, and next split time continue to be timed
Split number
internally by the watch. The split number of the
displayed time appears in the upper display.
•
After eight seconds, the ongoing lap time
measurement appears in the upper display and the
ongoing elapsed time measurement appears in the
lower display.
4. Repeat step 3 to record more split times.
Split time
5. Press D to stop the stopwatch.
6. Press A to clear the stopwatch to all zeros.
•
Split numbers are incremented automatically starting from 1 whenever you press
A in step 3 of the above procedure. The maximum split number is 99.
Recording a split time after that causes the split number count to restart from 00.
How stopwatch data is stored
The following table shows how stopwatch data is stored when you perform stopwatch
button operations.
Stopwatch Button Operation
Data Storage Description
Creates a new log. Stores the date the button was
From all-zeros, press D to start.
pressed, and the new log number.
Creates a new record with each button operation. Stores
Press A to display lap/split time.
the lap and split times and total elapsed time at each
point the button is pressed.
Press D to stop elapsed time
Resets the elapsed time to all zeros without recording
measurrement and then press A
data.
to reset.
•
See "Recall Mode" (page E-24) for details on how to recall time records from memory.
To recall stopwatch time records
1. In the Stopwatch Mode, check to make sure that the displays are reset to all zeros
(page E-19).
•
If all zeros are not displayed, reset the stopwatch.
2. Use the A button to select either the lap time screen (to view lap time records) or
the split time screen (to view split time records) (page E-19 and E-20).
•
To convert a lap time saved in the Stopwatch Mode to a split time, select the split
time screen.
3. Press the C button to enter the Recall Mode.
4. Use the A button to scroll through the log title screens from the newest to the
oldest until the title screen of the log whose records you want to view is displayed.
5. Press D to scroll through the records contained in the log you selected in step 4,
from the oldest to the newest.
To delete a log
1. In the Recall Mode, display the title screen of the log you want to delete.
2. Hold down B and D until
stops flashing on the display.
•
This deletes the log and all the records inside it.
•
Deleting a single log slides all newer logs (ones with higher log numbers)
upwards to fill the empty space. This cause the log numbers of all the newer logs
to be reduced by 1. If there are six logs currently in memory (numbered 01
through 06) and you delete log 03, the numbers of logs that previously were
numbered 04, 05, and 06 will change to 03, 04, and 05.
To use the countdown timer
Press D while in the Countdown Timer Mode to start the countdown timer.
•
When the end of the countdown is reached and auto-repeat is turned off, the alarm
sounds for 10 seconds or until you stop it by pressing any button. The countdown
time is reset automatically to its starting value after the alarm stops.
•
When auto-repeat is turned on, the countdown will restart automatically without
pausing when it reaches zero. The alarm sounds when the countdown reaches
zero.
•
The countdown timer measurement operation continues even if you exit the
Countdown Timer Mode.
Press D while a countdown operation is in progress to pause it. Press D again to
•
resume the countdown.
To stop a countdown operation completely, first pause it (by pressing D), and then
•
press A. This returns the countdown time to its starting value.
E-21
E-23
E-25
E-27
E-29
Hide quick links:
Advertisement
