Listening To Digital In - Denon RCD-M41 Owner's Manual

Contents Connections
OPTICAL IN1
OPTICAL IN2
Front panel Display
Playback

Listening to DIGITAL IN

1
ANALOG IN
2
3
0 Do not input non-PCM signals, such as Dolby Digital, and DTS. This causes noise
0 "SIGNAL UNLOCK" is displayed when audio signals that are not supported by this
o Specifications of supported audio formats
39
Rear panel
Settings Tips
Prepare for playback.
Check the connection "Connecting a digital device" (v p. 20), then
turn on this units.
Press OPTICAL IN1 or OPTICAL IN2 to switch the input
source to "OPTICAL IN 1" or "OPTICAL IN 2".
Play the component connected to this unit.
NOTE
and could damage the speakers.
unit are input, or the sampling frequency cannot be detected.
See "DIGITAL IN" (v p. 63).
Remote
Appendix
Index