Mitsubishi Electric PD-4265 Service Manual page 38

3. Adjustments after the replacement of the MAIN PWB (Using the remote control)
3-1. Product serial No. registration
Press the keys in the order of [MENU/ENTER] → [MUTE] → [EXIT] → [SLEEP]
(1)
the factory adjustment menu.
(2)
Press the [MENU/ENTER] key to select the [MONITOR INFORMATION] No. menu. (Example :
PD-5065)
(3)
Press the [FORMAT] key 4 times to display a cursor in the lower column of [SERIAL/NUMBER].
(Caution 1) No modification is possible here because this modification is already finished by 3-2.
Factory shipment setting (initial setting).
(Caution 2) No modification is possible here because registration is already finished at the time of
shipment in terms of maintenance parts.
(4)
Moving the POSITION/CONTROL keys of [
serial number that is listed in the serial label located on the rear surface of the product. Register the
serial number. (Blank → 0 – 9→A – Z)
(5)
Moving the POSITION/CONTROL keys of [
(6) Repeat the processes of (4) and (5) above and register the serial number completely.
38
MONITOR INFORMATION
MODEL NAME
: PD-5065
SERIAL/NUMBER
:
SOFT WARE VERSION
: F123
USAGE TIME
: 00000H
T1 025 T2 025
T3 025 T4 - -
[MENU/ENTER] NEXT
MONITOR INFORMATION
MODEL NAME
: PD-5065
SERIAL/NUMBER
SOFT WARE VERSION
: F 123
USAGE TIME
: 00000H
T1 025 T2 025
T3 025 T4 - -
[MENU/ENTER] NEXT
PD-5065
[EXIT] PREV
(Caution 1)
(Caution 2)
[EXIT] PREV
] and [ ], select the numerals and characters of the
] and [ ], select the next digit by means of a cursor.
→ [EXIT]
in order to enter