Table of Contents
Advertisement
3.1.4 Removing the REAR PANEL (for Asian version) (See Fig.8 to 10)
(1) Disconnect the POWER CORD from connector
the POWER BOARD assembly. (See Fig.8)
(2) Disconnect the connector wire from POWER BOARD as-
sembly connected to connector
BOARD assembly. (See Fig.8)
(3) Remove the three screws G attaching the HDMI BOARD
assembly. (See Fig.9)
(4) Remove the 13 screws H attaching the REAR PANEL.
(When remove the most right side screw, DIGITAL IN
JACK BOARD assembly come off, disconnect the connec-
tor wire from
CN302
of the MAIN BOARD assembly.) (See
Fig.9, 10)
1-14 (No.MB638)
CN101
of
CN111
of the FUSE
CN101
CN111
Fig.8
H
H
H
H
H
Fig.9
CN302
Fig.10
G
H
H
H H H
Advertisement
Table of Contents
