Table of Contents
Advertisement
BINDING TYPHOON H AND CGOET TO ST16
Step 1) Press "System Settings" on the screen, and if required press "OK" to
accept any pop up warnings/alerts.
Step 2) Tap the "Camera Select" button, choose the gimbal camera type CGOET,
and press "Select" to confirm. If required press "OK" to bypass any pop up warn-
ings/alerts.
About Controller
Step 3) Tap the "Bind" button, and lean the Typhoon H in the forward direction
twice (45°) until the Main LED indicator blinks orange rapidly.
Step 4) Tap the "Refresh" button on the screen.
Step 5) Select the "SR24_XXXXX" receiver listed in the column under "Model" ,
and "CGOET_XXXXX" you would like to bind to listed in the column under
"camera" . then tap 'Bind.
Welcome,Pilot
Choose a camera:
C-CG3
C-CG3-Pro
C-GOET
07
1:39 AM 7%
Name: C-CGET
Select
Advertisement
Table of Contents
