YUNEEC CGOET User Manual page 16

3-axis, brushless self-stabilizing gimbal camera
Table of Contents

Advertisement

PHOTO TAKING AND VIDEO RECORDING
The ST16 seamlessly integrates control of the CGOET so you can easily take still
photos and start/stop video recording using the corresponding buttons located on
the ST16.
TO TAKE A STILL PHOTO
Press the button located near the lower left corner of the ST16. You'll hear an au-
dible 'shutter' sound from the ST16 and the green LED indicator on the front of
the CGOET will blink blue once every time when taking a photo. It will take ap-
proximately 1-2 seconds to capture the photo and before you can take another
still photo.
Tap the [
] icon on the right side of the screen, and press "Photo" , you can
set the automatic shooting interval by sliding the "Auto Take Photo" switch from
right to left. The shooting interval can be set from 1-60 seconds (For example, if
the shooting interval is set at 20 seconds, the camera will take a photo every 20
seconds).
Model: Typhoon H
VOLTS
43.9 C
15.6V
GPS
Ready
SAT
0
POS
0.0000 E
0.0000 N
ALT
-0.0 m
G-SPD
0.0 KPH
DIS
41.3 C
N/A m
Touch the icon [
screen will display the list of pictures you have taken before. If you slide from right
to left on one picture icon and press the red "Delete" button, the photo will be de-
leted.
Pad
System Settings
] on the right side of the screen and press icon [
Welcome,Pilot
Photo
1s
Auto Take Photo
ROl
Palette
Single/Team
Auto Calibrate
Reset
Channel Settings
14
1:39 AM 0
7%
SD
7.23G
N/A
OBS.
Disabled
GPS
CALIBRATION
NOT
AVAILABLE
TASK
CAMERA
Model Select
], the

Advertisement

Table of Contents
loading

Related Products for YUNEEC CGOET

Table of Contents