Table of Contents
Advertisement
PREPARATIONS
SD CARD INSTALLATION
NOTICE: Before using the CGOET, a SD card should be
inserted into the camera. (A SD card is included in the
package.)
Step 1) Slide the memory card into the card slot according
to the direction of the arrow.
Step 2) When fully inserted, the card clicks into place. To
remove the card, place your fingernail against the edge of
the memory card and lightly press it further into the
camera. The card springs out far enough to be removed.
CAUTION: Keep the memory card out of the reach of children to prevent swal-
lowing.
ATTACHING CGOET GIMBAL CAMERA TO TYPHOON H
DAMPING PLATE
Step 1) Place the nose of Typhoon H towards the user.
Step 2) According to the direction indicated by the arrow
on the top of the gimbal, slide the damping plate of the
gimbal to the backboard of Typhoon H.
NOTICE: The CGOET gimbal camera should be installed
in the same direction as the arrow printed on the top of the
gimbal.
NOTICE: The gimbal should be fixed in place.
NOTICE: Power off the Typhoon H when installing or
removing the CGOET gimbal camera.
05
Advertisement
Table of Contents
