Zte MF920 User Manual page 25

In Device section you can change current password to access WEB UI, modify SMS settings, make factory
reset of device settings, reboot device, set power save mode, check for software update and change PIN
code of USIM card. Be careful and cautious when setting up and entering PIN and PUK. If you enter
incorrect PIN for 3 times, your USIM will be blocked. To unblock USIM-card you have to enter PUK. If you
enter incorrect PUK for 10 times, USIM will be damaged. In case of USIM damage, please, contact operator
customer service.
In Firewall section you can manage port filtering rules, change port mapping settings and enable or disable
UPnP and DMZ functions.
In Router section you can manage current IP address of device and subnet mask. Also you can check
device MAC address, set DHCP server mode and modify other DHCP settings.
In Wi-Fi Internet section you can set connection settings to other router, to use data connection of this
device providing access to this data connection to all devices, which is connected to 4G/Wi-Fi hotspot
"Beeline" via Wi-Fi or USB cable.
In Information section you can see current information about network status, Internet connection, check
USIM card status and current software version of device.
Data transfer detailed information
Attention!
Information on the amount of sent/received data provided to the Subscriber with the help of this software is
approximate and is for reference purposes only.
Actual billing of sent/received data is based on data from administrative and billing systems of the Operator.
The Subscriber shall pay for the Services according to the invoices for the Services from the Operator.
Exact information on data usage can be found via user account at .
https://my.beeline.ru/