Getting Started; Installation - AT&T CL82107 User Manual

Getting started

Installation

You must install and
charge the battery
before using the
telephone.
Install the telephone base close to a telephone jack and a power outlet
not controlled by a wall switch. The telephone base can be placed on a flat
surface or vertically mounted on the wall (see page 13). For optimum
range and better reception, place the telephone base in a central and open
location.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a DSL filter between the telephone
line cord and the telephone wall jack (see page 7). The filter prevents noise
and caller ID problems caused by DSL interference. Please contact your DSL
service provider for more information about DSL filters.
Your product may be shipped with protective stickers covering the handset
and telephone base displays - remove them before use.
For customer service or product information, visit our website at
www.telephones.att.com
1 (866) 288-4268
Canada, dial
Avoid placing the telephone base and charger too close to:
Communication devices such as television sets, VCRs, or other cordless
f f
telephones.
Excessive heat sources.
f f
Noise sources such as a window with traffic outside, motors, microwave
f f
ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
f f
Excessive moisture.
f f
Extremely low temperature.
f f
Mechanical vibration or shock such as on top of a washing machine or
f f
workbench.
STOP!
1 (800) 222-3111
or call
.
1
See pages
9-11 for easy
instructions.
. In