Handset Alert Tones; Telephone Base Alert; Tones - AT&T CL82107 User Manual

Appendix
Alert tones and lights

Handset alert tones

One short beep
One long beep
Two short beeps
Confirmation tone
(three rising tones)
Four beeps
Four short beeps
Telephone base alert tones
One long beep
Four short beeps
Beeps every
ten seconds
Fast ringer tone
Tone of each key press, if key tone is turned on.
Indication to begin recording a message, memo or
announcement.
You are pressing qCID or pDIR on a cordless handset
when the volume is already at its highest or lowest
setting.
-OR-
Call waiting tone.
-OR-
Error tone.
The system has completed the command successfully.
The other party has ended your intercom call.
-OR-
The handset has gone out of range from the base
during a call.
Low battery warning.
Indicates the start of message recording during call
screening or the end of a message playback session.
Registration failure tone.
Message alert.
You are setting the ringer volume by pressing the
pVOLUME+ or qVOLUME- key on the telephone
base.
129