5. Using a 3/8 inch drill bit, drill the hole for the control
bracket in the control panel
6. Install the mounting bracket with the 2 self-tapping
screws (5/16 x 3/4 inch)
7. Secure the control bracket to the control panel using
the other knob and the retaining plate
Note: Insert the retaining plate from behind the
control panel.
2
Figure 6
1. Knob
(Figure
5).
(Figure
5)
(Figure
6).
1
G011833
2. Retaining plate
Product Overview
Specifications
Note: Specifications and design are subject to change
without notice.
Width
Clearing width
Length
Height
Weight
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
10
121.3 cm (47-3/4 inches)
111.7 cm (44 inches)
109.7 cm (43-1/4 inches)
128 cm (50-7/16 inches)
152 kg (335 lb)