Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Smartswitch Manuals
  4. Controller
  5. STS-220
  6. Manual

Smartswitch STS-220 Manual

Deluxe programmable toilet controller for all electric marine toilets
Hide thumbs Also See for STS-220:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Smartswitch Toilet Controller
Model: STS-220
The unique Deluxe Programmable Toilet Controller by SmartSwitch was designed for all electric
marine toilets with remote, fresh or salt water flushing supply via an inlet pump or water solenoid
valve. The stylish control panel provides fully automatic programmed flushing when the
Flush touch pad is pressed. It also provides independent operation of the inlet or discharge
pumps for maintenance or line clearance when the manual touch pads are used. In-built
troubleshooting features and toilet pump protection are standard.
When pressed the
system will activate
a complete flush
cycle automatically.
If the tank system is
connected, this light will
turn on when the Holding
Tank is full and disable
any further flush cycles.
This Product has been Factory Preset to operate effectively without
Should you wish to alter these settings please follow proceeding
making any further adjustments.
instructions.
Water will be added
while the button is
held down.
(Max 20 seconds)
The extraction motor
will run while the
button is held down.
(Max 20 seconds)
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the STS-220 and is the answer not in the manual?

Questions and answers

Related Manuals for Smartswitch STS-220

Summary of Contents for Smartswitch STS-220

  • Page 1 Smartswitch Toilet Controller Model: STS-220 The unique Deluxe Programmable Toilet Controller by SmartSwitch was designed for all electric marine toilets with remote, fresh or salt water flushing supply via an inlet pump or water solenoid valve. The stylish control panel provides fully automatic programmed flushing when the Flush touch pad is pressed.
  • Page 2 Programming This product has three Model Modes of operations: Model Mode 1 = Standard Mode Model Mode 2 = Tecma Silence (Series) Model Mode 3 = Tecma Prestige (Series) This product has been factory default set to Model Mode 2 (see page 3) Factory Default: T1 = 20 seconds Model Mode = Tecma Silence (Series)
  • Page 3 Setting T3 Water Valve/Inlet Pump Time: After placing the unit in program mode, as in Step 1 above, press the Fill button the number of times required for the Water Valve/Inlet Pump time (one press = 0 sec’s, two = 1 second, three = 2 sec’s, etc).
  • Page 4 Model Timing Chart This device has three different timing sequences, any one may be selected. (Factory default is Model Mode 2 = Tecma Silence) Mode 1: Standard Model Mode 1 Start Water Inlet Discharge Motor Water Inlet Programmable Programmable Programmable 2 sec’s 2 sec’s from 1 - 20 sec’s...
  • Page 5 Programming the Device for Model Mode or Disable Features Place the unit in Model Mode / Disable Features Program Mode: Hold the Fill & Empty buttons down together for 3 seconds. The Holding Tank Full LED will give three flashes indicating you have entered program mode. While still holding down these two buttons, press the Flush button.

  • Page 6: Programming Flow Chart

    Programming Flow Chart Hold the Fill & Empty buttons down together for 3 seconds (LED will give three flashes) While still holding down these two buttons, press the Flush button (LED will give six flashes) Push Flush Tecma Silence Series Push FLUSH Push Empty For Model.

  • Page 7: Electrical Specifications

    Electrical Specifications: Supply Voltage 12-30 Volts DC (Auto-sensing) Quiescent Current .015 Amps Input EMI Protected Max Motor Output 44 Amps Max Valve Output 44 Amps Max EST Output 12 Amps Protection Reverse Polarity, Over Voltage, Over Temperature, Short Circuit. Connections Toilet Control Flush Tank Full Float Switch...

  • Page 8: Fitting Instructions

    Fitting Instructions “ Warning ” This device should be fuse protected and mounted in a dry area as close to the Toilet as is practical. DO NOT cover the ventilation slot on the top of this device. If the keyboard is mounted in an area where it may experience moisture or wetting, please ensure that a bead of silicon is placed around the keyboard to waterproof it.
  • Page 9  All technologies, design and Intellectual property is owned by Smart Switch Technologies Ltd Po Box 272, Waikanae. NZ Phone 0064-4-293-4201 Fax 0064-4-293-4201 Email: info@smartswitch.co.nz Web: www.smartswitch.co.nz...