Fixing The Lower Brackets - Smeg KDD90VXE-2 Instruction Manual

• Screw the brackets 7.1 to the front of the Hood Canopy using the screws 12a provided.
• Before tightening the Brackets completely, make all the adjustments to allow them to rest on
the lower base of the worktop to avoid deformation of the upper brackets 7.2 (Only for
KDD90VXE-2) as shown in the figure.
12a
• With the aid of a spirit level, set the Hood Canopy level vertically and fix it to the Lower
Surface using 2 screws 12c provided.
• Tighten the screws 12a completely.
EN

Fixing the Lower Brackets

7.1
12a
12c
7.1
3
30