To Position Without The Pipe Connector - Samsung flexwash WV60M9900A series User Manual

Installation

To position without the pipe connector

If you do not use the pipe connector, each drain hose can be positioned in the following
ways:
B
32 English
FlexWash_WV9900M-03768A-02_EN+CFR+MES.indb 32
Over the edge of a wash basin
The drain hose must be placed at a height
of between 24 in. (60 cm) and 35 in.
(90 cm) from the floor. To keep the spout
of the drain hose bent, use the supplied
A A
plastic hose guide (A). Secure the guide
to the wall using a hook to ensure stable
drainage.
ln a standpipe or laundry tub
The laundry tub (B) or standpipe (C)
A
must be no shorter than 18 in. (46 cm)
and no higher or longer than 96 inches
E
(245 cm). Make sure the drain hose and
D
the standpipe are not airtight. The height
of the standpipe (E) must be 43 in. (1100
mm) or higher from the floor.
C
A: Hose guide / D: Tie straps
NOTE
2/8/2017 8:02:06 PM