Predator 63078 Owner's Manual & Safety Instructions page 13

19. At the front of the Carburetor,
remove the Bolt (38) holding the
Fuel Pump Bracket (40) in place. See Figure N.
Fuel pump
Bracket (40)
Bolt (38)
Figure N: Remove Fuel pump Bracket
20. Underneath where the Fuel Pump Bracket was,
the Solenoid Valve (139) is connected.
Note the location of the green wire and green dot on
the connector. Unplug the connector. See Figure O.
Carburetor
Intake Elbow
(131)
Bolt
(132)
Solenoid wire
connector
Figure O: Disconnect Solenoid Valve wire connector
21. Remove Bolt (133) and two Bolts (132) from the
Carburetor Intake Elbow (131). See Figure O.
22. Remove the Carburetor assembly from the engine.
Keep it upright, it may contain fuel.
ITEM 63078
Bolt (133)
Bolt
(132)
Note location
of dots here.
For technical questions, please call 1-888-866-5797.
23. Hold the fuel drain port over a bowl, and open
the Carburetor Drain Plug to allow fuel to drain
out of that port. Once the carburetor is empty,
close the Carburetor Drain Plug. See Figure P.
fuel
drain
port
Figure p: Carburetor Drain
24. Turn the Carburetor assembly over.
25. Remove the four Carburetor Bowl Bolts and
remove the Carburetor Bowl. See Figure Q.
Carburetor
Bowl Bolt
Carburetor
Bowl
Carburetor
Bowl Bolt
Figure Q: Carburetor Bowl Bolts
Carburetor
Drain plug
Carburetor
Bowl Bolt
Carburetor
Bowl Bolt
Page 13