Magic Chef 6893VVD Use And Care Manual page 24

25 MAINTENANCE
__ _iii__:_ _ _L__ __ _S_I_;_L_ _ ¸_ _i__I _ _!! _• _ _ _ ,_ _ _L_i__ _ii_!i_ _¸_ __ ••_L_ •
The storagedrawer at the bottomofthe range is safe and If you have carefullyfollowed the recipe, reviewed the
convenient f or storingmetaland glasscookware.DO NOT bakingtipsinthismanualand stillfeelcooking resultsdonot
store plastic,paperware, food or flammable materialin this meet your expectations, you can adjust the oven
drawer.Remove drawerto clean underrange, temperature. DO NOT ADJUST THE TEMPERATURE if
To remove: Emptydrawer then pull drawer out to the first onlyone or two items are notbakingproperly.
stopposition.Lift upfrontof drawer and pullto the second If you think the oven shouldbe hotter or cooler,you can
stop position.Grasp sides and lift up and out to remove
drawer, adjust it yourself. To decide how much to change the
thermostat,set the oventemperature25°F higheror lower
To replace: Fitthe ends of the drawer glidesontothe rails, than the temperaturein yourrecipe,then bake.The results
Liftupdrawerfrontand gentlypush in to firststopposition, of the "test"shouldgiveyou an idea of how muchto adjust
Lift up drawer again and continueto slide drawer to the the thermostat.
closedposition.
To adjust the thermostat:
1. Pressthe OVEN TEMP pad.
oeoorarenOe ror a in o ur .O°
range must be level. 3. Press and hold the OVEN TEMP pad for several
Levelinglegsare locatedon seconds, The display will show the ambient oven
each cornerof the base of temperaturefor a few secondsthen00° will appear.
the range. Level by turning
the legs. To prevent range )_ • If 00° does not appear in the display, press the
from accidently tipping, STOP/CLEAR pad and begin again.
range should be secured to the floor by sliding a rear
leveling leg into the anti-tip bracket supplied with the ° If the oven temperature was previously adjusted, the
range, change will be displayed. For example, if the
temperature was reduced by 15°, -15 ° will be
displayed.
4. Press the • or y pad to select the temperature change
Your appliance is equ!pped with self-diagnostic software desired.
which continuously monitors the control to ensure safe and
proper operation. If the software detects a questionable • The oven temperature can be increased up to 35° or
situation, a FAULTCODE (F plus a number) will appear in reduced by as much as 35° (-35 °) in 5° increments.
the display, continuous beeps may sound and as a safety • Ifyou delay in selectinga temperature, the program will
precaution, the operation will be cancelled.
automatically cancel and 00° will disappear. Begin
If a fault code appears in the display and continuous beeps again if the program cancels.
sound, press the STOP/CLEAR pad. Then, reprogram the
cooking operation. If the fault code reappears in the display, 5. Press the STOP/CLEAR pad and the time of day will
call an authorized servicer. Do not use the oven until the reappear in the display. The oven will now bake at the
appliance has been serviced, adjusted temperature.
If the oven is heavily soiled, excessive smoke and flaring It is not necessary to readjust the oven temperature if
may result ina fault code during a self-clean cycle.Jfthis I there is a power interruption. This adjustment will not
occurs, press the STOP/CLEARpad and allow the ovento affect bro or clean temperatures.
cool for an hour. I