Controls - Daewoo KOG-366T0S Service Manual

CONTROLS

Tips : • Be sure to read the cookbook's introduction before operating the oven.
• Also remember to read this operating instruction for proper safety information and instruction before using
the oven.
• See the cookbook for specific recipes.
• Prior to setting the controls, place one cup of water in the oven, in a heat-proof glass measuring cup, for
testing purposes.
• When setting the controls, everytime a button is pressed, a beep can be heard.
• If you don't take off the food after end cooking, buzzer will sound as 1 minute.
CLOCK
NOTE : • When the oven is plugged in, "0:00" appears in the display window.
• The two dots between the hour and minute are the clock indicator lights. They will start to flash on
and off.
• The time of day will be displayed at all times, except when the oven is operating.
• In the oven of a power failure or if the oven is unplugged, the clock will have to be reset for the
proper time. Once power is restored or oven is plugged in, the display will show "0:00".
• To reset the time of day, repeat the steps given below.
• To check the time of day while the oven is poerating, press the CLOCK button, then the time will
be displayed for 3 seconds.
• When you turn DIAL KNOB, minutes are increased by to turn right and hours are increased as to
turn left.
SETTING THE CONTROL
1. Press CLOCK button.
If you push the CLOCK button once
again, you can select 12 hour clock
system.
Then guide lamp will starts blinking.
NOTE : If you are not setting current time for 3 seconds, display return to old time.
2. Turn left the DIAL KNOB for hour
you want.
3. Turn right the DIAL KNOB for
minute you want.
This example is 24 hour clock system.
NOTE : This oven is multiple
clock system.
7
NOTE :
• If you selected 12 hour clock
system, this digital clock
allows you to set from 1:00
to 12:59.
• If you selected 24 hour clock
system, this digital clock
allows you to set from 0:00
to 23:59.
• The colon will stop blinking.