Yamaha POCKETRAK 2G Service Manual page 6

I
SPECIFICATIONS
Internal Memory:
Recording Time (total time of A, B, C,
D and S folder):
Frequency Response (overall):
Recording Format:
Playback Format:
Frequency Response (playback):
Sampling Frequency:
Bit Rate (recording):
Bit Rate (playback):
Connectors:
Operating Temperature:
Output power (headphones):
Power Supply:
Battery Duration Time:
Dimensions (W x H x D):
Weight:
Included Accessories:
2GB
Approx. 3hr.10min. (PCM)
Approx. 35hr.20min. (XHQ)
Approx. 71hr. (HQ)
Approx. 142hr. (SP)
Approx. 284hr. (LP)
40 Hz – 20 kHz (Built-in microphones, PCM)
40 Hz – 15 kHz (Built-in microphones, XHQ)
40 Hz – 7.5 kHz (Built-in microphones, HQ)
40 Hz – 3.5 kHz (Built-in microphones, SP)
40 Hz – 3.5 kHz (Built-in microphones, LP)
MP3, PCM
MP3 (MPEG-1 LAYER-3, MPEG-2 LAYER-3, MPEG-2.5 LAYER-3),
WMA, PCM (only files recorded on this device)
20 Hz – 20 kHz
44.1 kHz (PCM, XHQ)
22.05 kHz (HQ)
11.025 kHz (SP)
16 kHz (LP)
1411 kbps, 16 bit (PCM)
128 kbps (XHQ)
64 kbps (HQ)
32 kbps (SP)
16 kbps (LP)
MP3 (16 – 320 kbps)
WMA (32 – 192 kbps)
(Some files may not be playable on this device.)
USB, (Headphones),
+5°C – +35 °C (+41°F – +95°F)
10mW + 10mW (at 16Ω load)
DC 1.5V ("eneloop" or "AAA/LR03/HP16" alkaline battery x 1)
Continuous Recording Time
SP: Approx. 25 hr. (alkaline)
Approx. 19 hr. (eneloop)
PCM: Approx. 9 hr. (alkaline)
Approx. 8 hr. 30 min. (eneloop)
(when recording LED/backlight are OFF and without headphones moni-
toring)
Continuous Playback Time (headphones)
MP3: Approx. 22 hr. (alkaline)
Approx. 17 hr (eneloop)
PCM: Approx. 9 hr. 30 min. (alkaline, eneloop)
(when backlight is OFF)
Continuous Playback Time (speaker)
MP3: Approx. 14 hr. (alkaline)
Approx. 11 hr. (eneloop)
PCM: Approx. 6 hr. (alkaline, eneloop)
(when backlight is OFF)
Approx. 34.2 x 119.5 x 13 mm
Approx. 49 g (including "eneloop," excluding soft case)
Owner's Manual, Earphones, USB connection cable, "eneloop"
(Rechargeable Ni-MH battery), DVD-ROM, Soft case, Microphone stand
adapter
(Microphone)
POCKETRAK 2G
3