Yamaha POCKETRAK 2G Service Manual page 10

Pocket recorder
Hide thumbs Also See for POCKETRAK 2G:
Table of Contents

Advertisement

The Removable Disk is not displayed when the unit is connected to the PC.
Possible cause
The unit is not connected to the PC correctly.
Make sure the connection is correct.
Corrective action
Disconnect the unit from the PC and reconnect it again.
Possible cause
Sufficient power is not being supplied from the PC to the unit.
If a USB hub is being used, reconnect the unit directly to the USB terminal on the PC. If the PC is equipped
Corrective action
with several USB terminals, try another terminal.
Possible cause
A network drive has been assigned.
If a network drive has been assigned, the drive letter (the letters used as drive names) is already taken, so
Corrective action
the Removable Disk cannot be created. Change the network drive assignments and reconnect the unit. Talk
to your network administrator about reassigning network drives.
Possible cause
Playback is locked with the security setting turned on.
Corrective action
Cancel the playback lock and connect the unit to the PC with the unit's power turned on.
Cannot recharge the eneloop.
Possible cause
The BATTERY SETTING is set to "ALKALINE."
Corrective action
Set the BATTERY SETTING to "eneloop".
Possible cause
Connecting the unit to the PC does not cause the battery to be recharged.
Corrective action
Press the Y
A file can't be erased.
Possible cause
The attribute of the file is set to "read only".
Connect the unit to the PC and change the file attribute or erase the file from the PC. Alterna-tively, format
Corrective action
(initialize) the built-in memory.
[ERROR FILE SYSTEM] is displayed and nothing else happens.
Possible cause
FAT administration system error.
Corrective action
Format (initialize) the built-in memory.
Cannot select the S folder.
Corrective action
Press and hold down the FOLDER/INDEX button while the unit is stopped.
Icon "
" appeared when you attempted to recharge the battery.
You attempted to recharge a battery other than the eneloop.
Possible cause
You attempted to recharge the battery, but the battery had not been inserted.
Corrective action
Insert the eneloop battery into the unit.
Possible cause
The unit is overheated.
Corrective action
Disconnect the unit from the PC, let the unit cool down for a while, then try to recharge again.
Y button for at least two (2) seconds.
Y
Y
Y
POCKETRAK 2G
7

Advertisement

Table of Contents
loading

Table of Contents