Yamaha POCKETRAK 2G Service Manual page 11

Pocket recorder
Hide thumbs Also See for POCKETRAK 2G:
Table of Contents

Advertisement

POCKETRAK 2G
Cannot divide a file.
Possible cause
There may be insufficient free memory.
Corrective action
Erase unnecessary files.
Possible cause
The file is too short to divide.
You can divide only files that exceed a specific minimum recording time.
PCM .... about one sec or longer
HQ ...... about four sec or longer
Corrective action
HQ ...... about eight sec or longer
SP ....... about 16 sec or longer
LP ....... about 32 sec or longer
The file transfer speed (from PC to unit) is slow.
Possible cause
The unit is connected to the USB1.1 terminal.
Corrective action
Connect the unit to a USB2.0 High Speed terminal.
Recordings include unwanted noise.
Possible cause
Recording mode or microphone sensitivity may not be appropriately set.
Change the recording mode or microphone sensitivity and try to record again. Determine the optimum set-
Corrective action
ting for your recording environment.
Format (initialize) the internal memory.
"Connection" icon does not appear when the unit is connected to the PC.
Some computers may not cause the icon to be displayed on the unit, or may not recognize the unit. Discon-
Corrective action
nect the unit from the PC, then reconnect it.
The calendar does not show the correct date and time.
Corrective action
Set the date and time again.
The playback is missing a small portion at the beginning of the file.
In order to minimize noise, 0.1 seconds from the beginning of the file is faded-in for playback (the volume will
Possible cause
gradually increase).
If you're using this device to play back a file that was created using DAW software such as Cubase AI, insert
Corrective action
a blank space of at least 0.1 seconds at the beginning of the file when creating it.
8

Advertisement

Table of Contents
loading

Table of Contents