Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ignition Pico 2 Wireless
Summary of Contents for Ignition Pico 2 Wireless
- Page 1 Manual Pico 2 Pico 2 Wireless...
-
Page 2: Table Of Contents
Table of contents Safety instructions ......................................3 1.1. For safe and efficient operation For safe and efficient operation ..........................3 Designated use ........................................ 4 2.1. Overhead installation ....................................5 Introduction ........................................6 Commissioning ........ -
Page 3: Safety Instructions
1. Safety instructions • For vertical operation, the equipment complies with IP63 standard. For vertical operation, the equipment complies with IP63 standard. For vertical operation, the equipment complies with IP63 standard. • All modifications to the device will void the warranty. All modifications to the device will void the warranty. -
Page 4: Designated Use
2. Designated use Every 3 weeks should be a regeneration charging regeneration charging to take place to avoid damaging to avoid damaging the battery. Regular breaks during operation increase the lifetime of your device. Regular breaks during operation increase the lifetime of your device. Avoid convulsions or any form of forceful impact during the installation or the start any form of forceful impact during the installation or the start any form of forceful impact during the installation or the start-up of the device. -
Page 5: Overhead Installation
2.1. Overhead installation Overhead installation Danger of life! Danger of life! You have to observe the regulations of BGV C1 (formerly VBG 70) and You have to observe the regulations of BGV C1 (formerly VBG 70) and You have to observe the regulations of BGV C1 (formerly VBG 70) and EN60598-2-17 17 Installations are to carry out by skilled personnel only. -
Page 6: Introduction
truss or an appropriate fastening point. Hang up the end in the fastening element and tie up the truss or an appropriate fastening point. Hang up the end in the fastening element and tie up the truss or an appropriate fastening point. Hang up the end in the fastening element and tie up the locking nut. -
Page 7: Ir Remote
5. IR remote 7 / 12... -
Page 8: Wireless Dmx
6. Wireless DMX LED display and its meaning Permanently off = not connected to the transmitter Permanently off = not connected to the transmitter Permanently on = connected with the transmitter / DMX is transmitted Permanently on = connected with the transmitter / DMX is transmitted 900ms on/ 100ms off = connected with the transmitter / No DMX signal 900ms on/ 100ms off = connected with the transmitter / No DMX signal 100ms on/ 100ms off = loose connection / Connection is perpared... -
Page 9: Trouble Shooting
7. Trouble shooting 7.1. Pico 2 IR The unit does not turn on. Failure of one color Error Error Failure of the projection. Failure of the projection. Light yield reduced Light yield reduced Possible causes causes Check and reaction Check and reaction No power supply. -
Page 10: Maintenance
8. Maintenance Opening the device may only be performed by technical personnel only! Opening the device may only be performed by technical personnel only! Remove the caps which are on the handle with a flat screwdriver. Remove the caps which are on the handle with a flat screwdriver. Among them are two screws, unscrew them and remove the Among them are two screws, unscrew them and remove the handle. -
Page 11: Technical Data
9. Technical data Power supply Voltage 100-240 V / 50-60 Hz Battery Light source LM type LED 4in1 Colour spectrum RGBW Power Number / Power 4x 10W Optics Beam angle 10° Zoom Fokus Connection Current in 4pol Controlling DMX512 Optional IR-Fernbedienung Hardware Protection class... - Page 12 Importer: B & K Braun GmbH Industriestraße 2 D-76307 Karlsbad www.bkbraun.com info@bkbraun.com 12 / 12...
Need help?
Do you have a question about the Pico 2 Wireless and is the answer not in the manual?
Questions and answers