Disassembly; Replacing The Fuse; Removing The Main Body; Removing The Dome Cover - JVC TK-AM200U Service Manual

1.1 REPLACING THE FUSE

CAUTION
Before replacing the fuse, check the cause of the fuse
blow in order to prevent a recurrence of the problem,
repair and confirm its normal operation. For safety and
to protect the equipment, be sure to replace the fuse
with the one having the specified parts number.
Symbol No.
F1
(1) Remove the POW board as described in 1.4.1.
(2) Remove F1, which is soldered onto the POW board.
Fig. 1-1

1.2 REMOVING THE MAIN BODY

1
(1) Loosen screw then rotate the main body in the direction
of the arrow f to remove the main body from the ceiling.
Fig. 1-2
SECTION 1

DISASSEMBLY

Part No.
QMFZ035-5R0-S
POW board
F1
1

1.3 REMOVING THE DOME COVER

Å
(1) Rotate the dome cover
and remove it from the main body.
Å
Fig. 1-3

1.4 REMOVING MAJOR CIRCUIT BOARDS

1.4.1 Removing the POW board

(1) Remove the three screws
bottom and remove the plate
ı
Fig. 1-4-1 (a)
Ç
(2) Remove the spring in the direction of the arrow.
(3) Disconnect CN8 and CN9, and the remove the POW board.
CN8
POW board
Fig. 1-4-1 (b)
in the direction of the arrow e
2
3 4
and the two screws on the
ı
.
3
4
CN9
Ç
1-1