Loading Envelopes - Epson XP-446 User Manual

9. Do one of the following to select the size and type of paper you just loaded on the product LCD
screen:
• To use the existing settings, press the OK button.
• To change the settings, press the up or down arrow button to select Change and press the OK
button. Select the paper size and press the OK button, then select the paper type, press the OK
button, and press the OK button again to confirm the settings.
Note: To prevent the paper setup screen from appearing automatically when you load paper, select
the Setup > Printer Setup > Paper Source Settings > Paper Configuration setting and set it to
Off. (This will also disable AirPrint.)
Always follow these paper loading guidelines:
• Load only the recommended number of sheets.
• Load paper short edge first, no matter which way your document faces.
• Load letterhead or pre-printed paper top edge first.
• Do not load paper above the arrow mark inside the edge guide.
• Check the paper package for any additional loading instructions.
Parent topic:
Related references
Paper Loading Capacity
Paper or Media Type Settings - Control Panel

Loading Envelopes

You can print on plain paper envelopes in this size: No. 10 (4.1 × 9.5 inches [105 × 241 mm]).
Loading Paper
55