Step 6; Reprogramming The Remote Control; Inserting Or Removing A Media - Panasonic SC-BT735 Operating Instructions Manual

STEP 6:

Reprogramming the
remote control
When other Panasonic products respond to this
remote control
Change "Remote Control" (
remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
To change the code on the main unit.
1
While stopped, press [START].
2
Press [3, 4] to select "To Others" and
press [OK].
3
Press [3, 4] to select "Setup" and press
[OK].
4
Press [3, 4] to select "General" and press
[OK].
5
Press [3, 4] to select "Remote Control"
and press [OK].
6
Press [3, 4] to select the code (1 or 2) and
press [OK].
To change the code on the remote control.
1
While pressing [OK]
Press and hold the numbered button (1 or
2), which has the same number you
selected in the step 6 for more than 5
seconds.
2
Press [OK].
VQT2Q52
22
40) on the main unit and the
Inserting or removing a
media
≥ When inserting a media, ensure that it is facing the right way
up.
≥ While the reading indicator is displayed, do not turn off the
unit or remove the media. Such action may result in loss of
the media's contents.
≥ When removing the SD card, press on the centre of the card
and pull it straight out.
≥ If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on connected
equipment. For details, refer to the instructions for the
connected equipment.
∫ To switch sources
Press [BD/SD] or [EXT-IN] to select "BD/DVD", "SD" or
"USB".
≥ If a media is inserted while the unit is stopped, the source
switches automatically depending on the inserted media.
SD CARD
SETUP MIC