Firmware Updating - Panasonic SC-BT735 Operating Instructions Manual

Network Easy Setting (Connection Test)
Network Easy Setting (Connection Test)
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select "Yes" and press [OK] to check network
connection again.
Select "No" and press [OK] to finish Network
Easy Setting.
Yes
OK
Display
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
Network Easy Setting (Internet Connection Test)
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
OK
Display
Cannot find the server. ≥ "Primary DNS" and "Secondary
(B019)
Failed to connect to ≥ The server may be busy or the
the server.
(B020)
≥ Settings of "Proxy Server
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting "Network Easy Setting" in
the Setup menu. ( 40)
≥ You can redo these settings individually using "Network Settings". (
≥ Do not connect to a wireless network for which you do not have usage
rights. Wireless networks for which you do not have usage rights (SSID
may appear during the automatic search for a wireless network
environment. However, if you connect, there is a risk that it will be regarded
as illegal access.
: Fail
: Fail
: Fail
No
Check the
following
:Fail ≥ Connection of
the LAN
cables
:Fail
18)
(
:Fail
≥ Connection
:Pass
and settings
of the hub
:Fail
and router
:Fail ≥ Settings of
"IP Address /
:Pass
DNS
Settings"
:Home
( 40)
network
available
:Fail
:Pass
:Pass
:Fail
: Fail(B019)
Check the following
DNS" settings of "IP Address /
DNS Settings" ( 40)
service may have been
suspended. Please wait a few
moments, and then try again.
Settings" ( 40) and the router
≥ After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router (Access point) might change. When you have
trouble getting online on your PC, perform the network settings of your PC
in accordance with the settings of Wireless router (Access point).
*2 This is a name given to identify specific networks among wireless LANs.
When the SSID is the same in two devices, data can be transmitted
between them.

Firmware updating

Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
Information")
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, "FINISH" will be displayed on the
unit's display. Unit will restart and the following screen will be
displayed.
The firmware has been updated.
Current Installed Version
≥ You can perform update anytime by selecting "Firmware Update" in the
Setup menu. (
40)
≥ Downloading will require several minutes. It may take longer or may not
work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set "Automatic
Update Check" to "Off". (
40)
* 2
)
Firmware Update
No
OK
RETURN
40, "System
: x.xx
OK
RETURN
40)
VQT2Q52
21