HP StorageWorks XP10000 Site Preparation Manual page 72

ExSA
failover
FC
FC-AL
FCP
fence level
FICON
GB
GLM
HA
HBA
host mode
hot standby
HP
I/O
LAN
LD, LDEV
72
The LUSE feature is available when the HP StorageWorks LUN
Configuration Manager product is installed.
Extended serial adapter.
Disconnecting a failed unit or path and replacing it with an alternative unit
or path in order to continue functioning.
Fibre Channel.
Fibre Channel arbitrated loop.
Fibre Channel Protocol.
A level for selecting rejection of a write I/O request from the host according
to the condition of mirroring consistency.
IBM mainframe Fiber Optic Connection.
Gigabytes.
Gigabyte link module.
High availability.
Host bus adapter. A built-in function or a card installed in a PC or other
host computer to enable connection of the host to the SAN.
Each port can be configured for a particular host type. These modes are
represented as two-digit hexadecimal numbers. For example, host mode 08
represents an HP-UX host.
Using two or more servers as a standby in case of a primary server failure.
Hewlett-Packard Development Company.
Input/output (applies to an operation or device).
Local area network.
Logical device. An LDEV is created when a RAID group is carved into
pieces according to the selected host emulation mode (that is, OPEN-3,
OPEN-8, OPEN-9). The number of resulting LDEVs depends on the
selected emulation mode. The term LDEV is often used synonymously
with the term volume.
HP StorageWorks XP10000 Disk Array Site Preparation Guide