HP StorageWorks XP10000 Site Preparation Manual page 64

64
The second rack shown in
Power requirements are 200 VAC, single-phase, 20-Amps.
Figure 9. Second rack AC power cord connections
HP offers the following AC power cables and connectors, which you can
order individually (four each are required per primary or second rack):
• E7805A HP 4.5 m power cord w/NEMA L6-30P plug
• E7806A HP 4.5 m power cord with stripped ends
• E7808A HP 240 V power cord w/ IEC 309 plug, 4.5 m
• E7809A HP 240 V power cord w/ CEE7/7, 4.5 m
• E7810A HP power cord for China
• E7811A HP power cord for Israel
• E7804A HP power cord, 4.5 m, C19/C20 Plug (jumper for UPS)
• E7798A cord w/IEC 320-C20 connector and 2.5 m jumper for UPS
You can supply your own power cables as long as they meet a 20 amp
rating, fit the IEC320-C20 PDU inlets, and meet local codes.
HP StorageWorks XP10000 Disk Array Site Preparation Guide
Figure 9 has four connections to AC power.