Buzzer Is Active; Airways Indicator; Backlight Brightness Dimmed - Miele TCE 620 WP Operating Instructions Manual

 Buzzer is active
The buzzer sounds to indicate the end
of the programme. It can be switched
on or off.
The continuous tone which sounds
when there is a fault is independent of
the buzzer.
Options
 = off
 = on (default setting)
 Airways indicator
Fluff has to be removed after drying. In
the event of an especially heavy build-
up of fluff the programme is cancelled
and  and  flash.
You can decide the degree of fluff that
triggers this error message.
You will have an idea of how often this
should be done after a few drying
programmes.
Options
 = off
  does not appear.
 = heavy
  only appears when there
is a heavy build-up of fluff.
 = normal (default setting)
 = delicate
  appears when there is
only a small build-up of fluff.
Programmable functions
 Backlight brightness
dimmed
The brightness of the dimmed sensors
in the control panel can be selected at
seven different levels.
The brightness changes as soon as you
select a different setting.
Options

= darkest level
 = Factory default setting
...
 = brightest level
71