Programming
You can use the programmable
functions to alter the dryer's
electronics to suit your requirements.
The programming is carried out in 8
steps (, , ... ) using the sensor
controls.
Accessing the programming level
Before you begin, ensure that:
– The dryer is switched on: a
programme is selected.
– The door of the dryer is open.
Touch the Start/Stop sensor and
hold it down during steps -.
Close the dryer door.
Wait until the Start/Stop sensor lights
up constantly ...
... and then release the Start/Stop
sensor.
Programmable functions
Choosing and selecting the
programmable function
The number of the programmable
function will appear in the display as
and a number:
e.g. .
Touch the or sensor to scroll to
the next or previous programmable
function:
Programmable function
Cotton drying levels
Minimum iron drying levels
Extended cool down
Buzzer volume
Keypad tone
Lock code
Conductivity
Control panel switch-off status
Dryer switch-off status
Memory
Anti-crease
Buzzer is active
Airways indicator
Backlight brightness dimmed
Confirm the selected programmable
function by pressing the Start/Stop
sensor.
65