Changing The Programme Sequence - Miele TCE 620 WP Operating Instructions Manual

You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If you try to change a programme, 
lights up until the original programme is
reset.
Exception: if the programme selector is
turned to the  position, the dryer will
switch off.
You will need to cancel the current
programme before you can select a
new one.
Bear in mind that hot steam can
escape after the door is opened.
Cancelling a programme while
it is running and selecting a
new programme
 Touch the Start/Stop sensor.
The items will be cooled down, as long
as a certain drying time and drying
temperature has been reached.
If you press Start/Stop again during this
time,  will light up.
 To cancel, turn the programme
selector to .
 Select and start a new programme
straight away.

Changing the programme sequence

Adding or removing laundry
after a programme has started
 Touch the Start/Stop sensor.
The items will be cooled down, as long
as a certain drying time and drying
temperature has been reached.
If you press the Start/Stop sensor again
during this time,  will light up.

Do not touch the back of the drum
when adding or removing items. The
drum and the items can be very hot.
 Add or remove items.
 Close the door.
To continue with the programme:
(select a drying level first of all, if
necessary)
 Touch the Start/Stop sensor.
Programme duration
Altering the programme sequence can
cause the programme duration shown
in the time display to be adjusted.
Danger of burning.
35