Table of Contents
Advertisement
Available languages
Available languages
6
OPERATION
The cable remote provided allows operating the machine in three modes (manual mode, continuous mode
and timer mode). With the wireless remote control it is possible to activate the fog output via radio over a
distance of 25 meters. Alternatively, the machine can be controlled with a DMX controller. DMX control will
take priority over remote control operation. The control panel allows the user to adjust the DMX starting
address, wireless remote control and fluid sensor.
Switching on and off
1
Switch on the machine with the power switch (lights up). The machine will heat up
for approx. 3 minutes the display indicates "HEAT".
2
While the unit is warming up, fog output will not be possible yet. Program the
necessary menu settings with the control panel. Once the warm-up process is
completed, fog output will be possible. The display stops flashing.
3
After operation, switch off the machine with the power switch.
The output nozzle will heat up during operation. Therefore do not touch the nozzle until it has
cooled down completely!
Prior to transportation, allow the machine to cool down and completely empty the tank.
Never operate the fog machine without fog fluid. Fire hazard due to overheating! Besides, the
unit may be damaged.
During operation smoke emission may stop. In this case the device is heating up again. After a
short period, the machine will be ready to emit fog again. This process guarantees an
appropriate vaporization temperature and the best fog emission possible. The temperature is
regulated by a high-quality thermostat.
Menu Settings
Menu Structure
Display
Addr
ErПo
OrL
Operating Buttons
Button
MENU
ENTER
▲/▼
www.eurolite.de
Function
DMX address (1 to 512)
Wireless remote on/off
Fluid sensor on/off
Function
Selecting menu items
Editing menu items and confirming settings
Setting values
23
Advertisement
Table of Contents
