Step 4: Connecting The Fm And Am/Mw Antennas; Step 5: Connecting The Power Cord - Philips HTS3011/55 User Manual

AM/MW antenna
1
Main Unit (rear)
Step 4: Connecting the
FM and AM/MW
antennas
A
Connect the supplied AM/MW loop
antenna to the AM/MW socket. Place
the AM/MW loop antenna on a shelf, or
attach it to a stand or wall.
B
Connect the supplied FM antenna to the
FM 75 socket. (For some models, the
Ω
FM antenna has been connected in the
factory.) Extend the FM antenna and fi x
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
1_hts3011_55_eng 4_final807.indd17 17 1_hts3011_55_eng 4_final807.indd17 17
Basic Connections
FM antenna
2
Step 5: Connecting the
After everything is connected
properly, connect the AC power
cord into the power outlet.
The standby LED on the main unit lights
up.
Helpful Hints:
– Refer to the type plate at the rear or
bottom of the product for identifi cation and
supply ratings.
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
(continued)
Main Unit (rear)
power cord
2008-02-13 10:14:41 AM 2008-02-13 10:14:41 AM
17