Audio Setup - Philips HTS8141/12 User Manual

Audio setup

1
Press OPTIONS.
[ General Setup ] menu is displayed.
2
Press V to select
press B.
3
Select an option, then press OK.
Audio Setup
Ambisound Setup
HDMI Audio
Night Mode
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press
[ Ambisound Setup ]
Change the Ambisound setup.
Options Descriptions
[ Setup Select this if you want to go
Guide ] through the complete
Ambisound settings.
[ Room Select the type of walls that
Acoustics ] surround your room.
[ Room Select this unit placement in
Placement ] the room.
[ Height ] Select the height at which this
unit is placed.
[ Listening Select the distance between
Position ] your listening position and this
unit.
40 EN
[ Audio Setup ], then
OPTIONS.
Tips
•
See chapter 'Get Started - Start Ambisound setup'
for detailed information.
[ HDMI Audio ]
When you connect this unit and TV with HDMI
cable, select the audio output setting for this
connection.
• [ On ] – the sound is output through both
your TV and this speaker system. If the
audio format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
• [ Off ] – disable audio output from your TV.
The sound is only output through this
speaker system.
[ Night Mode ]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [ On ] – for quiet viewing at night (DVDs
only).
• [ Off ] – enjoy surround sound with a full
dynamic range.