Weldtronic TM250C Operating Manual page 45

Warranty Periods
We offer the following Warranty Periods from date of purchase;
Equipment Power Sources
TitanTIG, TitanMIG, TitanARC Inverter Series (Power Source)
TronicTig, TronicMIG, TronicPlas Inverter Series (Power Source)
EuroMIG Transformer MIG Series (Power Source)
TronicCool Water Coolers
Electrode Ovens
Straight Line & Pipe Cutters (Power source only)
Positioners & Rotators (power source only)
Gas apparatus
TronicFlame Gas & Welding Kits
TronicFlame Regulators
Automatic Welding Helmets
Clearwelding® CWH720S Series Automatic Helmet
Clearwelding® CWH800S / 815S / 820S Series Automatic Helmet 2 Years
Welding Accessories
MIG , TIG & Plasma Torches
Earth & Work Leads
Gas Hose & Interconnecting Cables
(Clause 1) 3 Year warranty on transformer, inductor, & Rectifier.2 Year Warranty on PCB and all other
components.
(Clause 2) This only covers manufacture defaults on all accessories for the first three months after date of
purchase (e.g. MIG/TIG/Plasma Torches, Earth Leads, Gas hose, etc.).
(Clause 3) Gas Hose & Flashback arrestors are subject to and covered by the manufacturer's individual
warranty.
(Clause 4) 1 & 2 Year warranty on ADF Lens. 3 Month warranty on Helmet shell, harness & fittings.
Warranty, Returns & Exchanges
(1)Subject to the conditions of warranty set out in the warranty period, Weldtronic International P/L
warrants that if any defect in any workmanship on any product has occurred then the conditions applicable
to the warranty period are;
(a)The warranty applies on the basis of the goods being used on the equivalent of single daily eight (8) hour
shift.
(2)The warranty shall not cover defect or damage which may be caused or partly caused by or arise through:
(a)Failure on the part of the buyer to properly maintain any goods.
(b)Failure on the part of the buyer to follow any instructions or guidelines provided by Weldtronic.
(c)Any use of any goods otherwise than for any application specified on a quote or order form.
(d)The continued use of any goods after any defect becomes apparent or would have become apparent to
a reasonably prudent operator or user.
(e)Fair wear and tear of goods or any part thereof including but not limited to items listed in warranty
exclusions.
(f)Misuse, neglect, accident, vandalism or damage in transit or natural disaster.
(3)The warranty shall cease and Weldtronic International P/L shall thereafter in no circumstancesbe liable under the
terms of the warranty if the workmanship is repaired, altered or overhauled without Weldtronic International
consent.
(4)In respect of all claims Weldtronic International P/L shall not be liable to compensate the buyer for any delay
in either replacing or remedying the workmanship or in properly assessing the buyers claim.
TitanMig AU 250C Manual_ Issue A 0415
2 Years (Clause 2)
2 Years (Clause 2)
3 Years (Clause 1&2)
1 Year (Clause 2)
1 Year (Clause 2)
1 Year (Clause 2)
1 Year (Clause 2)
3 Months (Clause 2&4)
1 Year
1 Year (Clause 4)
(Clause 4)
3 Months
3 Months
3 Months
41