1.3
Technical Specifications
Duty Cycle@40°c to AS/NZ60974
Dimensions Power Source (LxWxH)
General Information
▲ Do not operate or install this equipment without thoroughly reading this manual and the safety
precautions contained throughout.
Save this manual and keep it handy for reference.
Disconnect mains of the semi-automatic welding machine after finishing work or before a long break.
▲ DO NOT make any modifications to the machine. It may cause changes in the features and
deterioration of technical data.
▲ Any adaptations to this machine are prohibited and may void the warranty.
▲ Warranty is void if any damage to the machine is caused by misuse.
Acceptable range of ambient temperature is from 10—40°C.
Acceptable range of humidity is 20°C at 95% humidity.
Specifications may change without previous notice.
TitanMig AU 250C Manual_ Issue A 0415
Power Supply / Phases (V-Ph)
Output Current Range MIG
Output Current Range MMA
Rated Power MIG
Power factor
I Max MIG
MMA
I effMIG
MMA
Wire Feeder Type
Protection Class
Insulation Class
Weight Power Source
(Excluding Trolley)
▲ Mig 250MTS Compact
240V +/-15% 1 Phase
40% @ 250 Amps MIG
100% @ 158 Amps MMA
30A/15.5V - 250/26.5V
10A/20.4V - 250/33.0V
12.6 KVA
0.75
46.3 Amps
52.5 Amps
29.3 Amps
33.2 Amps
Gear Driven 4 Roll
IP 21S
F
685x295x560mm
38 Kg
13