Rating Label / Compliance Plate - Weldtronic TM250C Operating Manual

1.4Rating Label / Compliance Plate

14
▲ Important Note on TitanMig
250MTS Input Power Supply
This unit has been supplied with
a downgraded 15 Amp primary
supply plug for commissioning
purposes only. You are advised to
upgrade the input power plug
and lead to a minimum of 32A if
sustained usage at maximum
amperage is desired.
▲ WARNING
With the 15A plug supplied it is
recommended that the operator
does not exceed more than
180Amps, as use of higher
amperages over this amount may
lead to failure and overheating of
the 15A plug and circuit, which
may result in electrical supply
component damage
ultimately electrical fires.
▲ Fitted for commissioning
▲ Recommended outlet
and