Weldtronic TM250C Operating Manual page 12

FLYING METAL can injure eyes.
welds cool, they can throw off slag.
BUILDUP OF GAS can injure or kill.
HOT PARTS can cause severe burns.
MAGNETIC FIELDS can affect pacemakers.
welding operations.
NOISE can damage hearing.
Noise from some processes or equipment can damage hearing.
8
 Welding, chipping, wire brushing, and grinding cause sparks and flying metal. As
 Wear approved safety glasses with side shields even under your welding helmet.

Shut off shielding gas supply when not in use.

Always ventilate confined spaces or use approved air-supplied respirator.
 Do not touch hot parts bare handed.
 Allow cooling period before working on gun or torch.
 Pacemaker wearers keep away.
 Wearers should consult their doctor before going near arc welding, gouging, or spot
 Wear approved ear protection if noise level is high.