TP-Link Archer VR600 User Manual page 94

Chapter 14
I want to:
How can I
do that?
Visit multiple networks and multiple servers at the same time.
For example, in a small office, my PC can surf the internet, but I
also want to visit my company's server. Now I have a switch and
another router. I connect the devices as shown in the following
figure so that the physical connection between my PC and my
company's server is achieved. To surf the internet and visit my
company's network at the same time, I need to configure the
static routing.
LAN: 192.168.1.1
1 Make sure the routers use different LAN IP addresses on the
same subnet. Disable Router 2's DHCP function.
2 Visit http://tplinkmodem.net, and log in with the account you
set for the router.
3 Go to Advanced
current WAN Interface
4 Click Add to add a new static routing entry. Finish the settings
according to the following explanations:
Specify Your Network Settings
Modem router
Router 2
WAN: 172.30.30.100
LAN: 192.168.1.2
Switch
My PC
192.168.1.100
> Network > Static
and click Save.
Company's server
172.30.30.1
Routing. Select your
90