TP-Link Archer VR600 User Manual page 115

6 Please contact our Technical Support if the problem persists.
T5 How do I clone a MAC address?
You can manually change the MAC address of the modem router. It is helpful when your
internet access account provided by your ISP is bound to one specific MAC address,
in other words, your ISP just permits only one computer with the authenticated MAC
address to access the internet. In this case, you can use MAC Clone to allow more
computers to access the internet via the same account.
1 Visit http://tplinkmodem.net, and log in with password you set for the modem router.
2 Go to Advanced
get the MAC Clone
• If you are using the computer with the authenticated MAC address to access
the modem router, please select
• If you know the authenticated MAC address, please select
Address and then enter the address.
3 Click OK to make the settings effective.
T6 How can I change my computer's settings to obtain an IP address
automatically?
To change the computer's network settings, follow the steps below.
• For MAC OS X:
1 ) Click the Apple icon, and select
2 ) Click the Network icon.
3 ) Select Ethernet
left panel, then click Advanced.
4 ) Click TCP/IP.
5 ) From the Configure IPv4
6 ) Click OK.
> Network > Internet
section.
System Preferences
(for wired connection) or
drop-down list, select
page. Click the Add
Use Current Computer MAC
Wi-Fi (for wireless connection) in the
Using
icon, and scroll down to
Address.
Use Custom MAC
from the drop-down list.
DHCP.
111