Stretch Stitch Balance - Janome MS5027PR Service Manual

STRETCH STITCH BALANCE

TO CHECK:
1. SET THE STITCH SELECTOR AT " ", THE STITCH LENGTH CONTROL AT STRETCH STITCH, AND
THE STRETCH STITCH ADJUSTER AT "
2. PLACE A PIECE OF PAPER ON THE NEEDLE PLATE AND LOWER THE PRESSER FOOT.
3 TURN THE HANDWHEEL TO MARK NEEDLE POINTS ON THE PAPER.
4. THE NEEDLE SHOULD PENETRATE THE SAME HOLE IN A FORWARD AND REVERSE DIRECTION
WHILE TURNING THE HANDWHEEL TOWARDS YOU.
SELECTED PATTERN
MECHANICAL ADJUSTMENT
STITCH LENGTH CONTROL
".
19
MS5027PR