Janome MS5027PR Service Manual page 33

ZERO FEEDING
ADJUSTMENT PROCEDURE:
1. REMOVE THE BELT COVER (SEE PAGE 9).
2. SET THE STITCH SELECTOR AT "
3. PLACE A PIECE OF PAPER ON THE NEEDLE PLATE.
4. IF THE PAPER MOVES FORWARD, TURN THE ADJUSTING SCREW (C) IN DIRECTION (A).
IF THE PAPER MOVES BACKWARD, TURN THE ADJUSTING SCREW (C) IN DIRECTION (B).
FORWARD
MECHANICAL ADJUSTMENT
BACKWARD
", AND THE STITCH LENGTH CONTROL AT "0".
31
MS5027PR
(A)
(B)
(C)