Janome MS5027PR Service Manual page 8

MS5027PR
1
1
2
3
4
3
4
AUTOMATIC NEEDLE THREADER
1
LOWER THE PRESSER FOOT. DEPRESS THE
NEEDLE THREADER KNOB AS FAR AS IT WILL GO.
THE HOOK COMES OUT THROUGH THE NEEDLE
EYE FROM BEHIND.
NEEDLE THREADER KNOB
1
2
HOOK
2
2 DRAW THE THREAD DOWN AROUND THE
THREADER GUIDE AND UNDER THE HOOK.
THREADER GUIDE
3
4
HOOK
3
RELEASE THE THREADER KNOB SLOWLY WHILE
HOLDING THE THREAD END WITH YOUR HAND.
A LOOP OF THE THREAD IS PULLED UP THROUGH
THE NEEDLE EYE.
4
REMOVE THE LOOP FROM THE THREADER AND
PULL OUT THE THREAD END FROM THE NEEDLE
EYE.
NOTE:
THE AUTOMATIC THREADER WORKS WELL WITH
THE THREADS #50-100 AND NEEDLES #11-16, THE
BLUE TIPPED NEEDLE AS WELL.
6