Sync Audio Output With Video Play - Philips HTS3270 User Manual

[Disc Interval]
Divides the total disc time by six and play the
fi rst few seconds of these intervals.
[Track Interval]
Divides the current track by six and play the
fi rst few seconds of these intervals.
This option is not available in stop mode.
Tip
•
You can change the PBC setting (see 'Adjust
settings' > 'Preferences' > [PBC] ).

Sync audio output with video play

If the video play is slower than the audio
output (sound does not match with the
pictures), you can delay the audio output to
match the video.
1
Press and hold AUDIO SYNC until
'AUDIO SYNC' is displayed.
2
Within fi ve seconds, press VOL +/- to set
the delay time for audio output.
Note
•
If the volume control is not used within fi ve
seconds, it resumes normal volume control
function.
EN
24
Quick skip play to a specifi c time
1
During play, press
The disc status menu is displayed.
»
2
Press to view information, then press
OK .
• [TT Time] (title time)
• [Ch Time] (chapter time)
[Disc Time] (disc time)
•
[Track Time] (track time)
•
3
Press the Numeric buttons to enter the
time where you want to skip to, then
press OK .
Note
•
The options are different depending on the
disc type.
Repeat play a specifi c section
1
During play, press REPEAT A-B where
you want to set as the starting point.
2
Press REPEAT A-B again to set the
ending point.
Repeat play starts.
»
3
To cancel repeat play, press REPEAT A-B
again.
Note
•
The marked section for repeat play is only
possible within a track/title.
INFO .