Alarm Operation - Profoon PDX-2708 User Manual

9.4 ALARM OPERATION:

• when the [ sluimer ] function is enabled and you press a random but-
ton to stop the alarm signal, the alarm will sound again after 7 minutes;
you can disable an enabled snooze function by pressing and holding
the End button for at least 5 seconds while the alarm sounds (or by
disabling the alarm function according to the instructions in the previous
paragraph)
• the alarm is not repeated daily
• the alarm volume is the same as the set ring volume; if the ring volume
is set to 0 (off), the alarm signal is set to volume level 1
the display will show the word [ SLUIMER ]
press the
now use the
snooze function (see below an explanation of the snooze
function)
press the
the End button to return the handset to standby mode
• the symbol appears in the display when the wake-
up signal is enabled
• at the set time, the alarm will sound for 45 seconds
or until you press a random button to stop the alarm
signal beforehand
button
and buttons to enable or disable the
button to save your settings and press
33