Fm Presets; Display Screen Mode - Sirius XM RAdio ONYX EZR User Manual

Using Your Onyx EZR

FM Presets

FM presets make it easy to quickly access stored FM channels and choose a new FM channel from the
saved presets .
FM presets are used when you use PowerConnect or the FMDA to listen to your Onyx EZR through
your vehicle's FM radio . (Vehicle Dock Only .)
To use a different FM preset:
1. Press FM to display the current FM preset .
2. To display and select the next FM preset, press FM again . The Radio
will tune to the displayed FM channel . If the preset is the one you
want, press Menu or wait for the screen to time out .
3. Repeatedly pressing FM will cycle through the FM presets .
4. Set your vehicle's FM radio to the same FM channel .
IMPORTANT! You need to ensure that your vehicle's FM radio is tuned
to the same FM channel .
TIP! To configure the list of preset FM channels, you need to find
available FM channels in your area . Refer to "Find Available FM Channels
in Your Area" on page 29 . Next, refer to "Set and Select an FM
Channel" on page 30 .

Display Screen Mode

The display screen on the Onyx EZR can be adjusted to display a black background with white text,
or a white background with black text .
To switch between display modes:
1. At the main display screen (when not in TuneMix), press and hold the Jump button until the
display screen changes mode . Repeat to toggle between the display screen modes .
The display mode can also be adjusted through the menu settings . Refer to "Display Settings" on
page 34 .
22
White text on a black background
32 The Bridge
Jim Croce
Operator (That's Not the Way It Feels)
Lost Time In A Bottle
Onyx EZR with Home Kit User Guide
Black text on a white background
32 The Bridge
Jim Croce
Operator (That's Not the Way It Feels)
Lost Time In A Bottle
103.7
Set your vehicle radio to
the above channel to
enable audio
99.3
Set your vehicle radio to
the above channel to
enable audio