Page 2
LINE IN 1 GUITAR/ BASS *3 LINE IN 2 MIC *3, 4 To the GO:MIXER, connect the instrument, mic, or audio player etc. that you want to record. Connect the included USB cable first to the GO:MIXER and then to your...
Page 3
smartphone. MEMO If you are unable to record on your smartphone, slowly repeat step 2 once again. * 1: Connect only the included cable to this unit’s USB port. Also, do not connect the included cable to any device other than this unit. * 2: If connecting an Android smartphone to this unit, connect the tagged plug to this unit.
Page 4
* In some cases, noise might be heard when you connect a smartphone, or when you start up or operate an app.
Contents Adjusting the Volume Adjust the knob so that the PEAK indicator lights briefly when your performance is loudest. MASTER INSTRUMENT PEAK OUT *5 (L, R) If this stays lit, the sound is too loud. MEMO GUITAR/ BASS To adjust the volume of the devices connected to LINE IN 1 and LINE IN 2, use the volume controls of those devices.
Page 6
Contents Record When you’re ready, use an app (such as a video camera) on your smartphone to record.
Page 7
Contents Using a Backing Track for Karaoke (CENTER CANCEL) The sound from the device connected to LINE IN 1 can be used for karaoke (*6). Set [CENTER CANCEL] to the “ON” position. CENTER CANCEL * 6: Depending on the sound, the instruments or vocals in the center might not be canceled completely.
Page 8
* This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website. https://www.roland.com/...
Need help?
Do you have a question about the GO:MIXER and is the answer not in the manual?
Questions and answers