Other Settings; Settings Related To Basic Operations; Settings Related To Display - Epson EB-L25000U User Manual

Installing the Projector

Other Settings

Settings related to basic operations

Purpose
To start/stop projection by turning
on/off the main power switch or
plugging in or unplugging the
power plug of the projector.
To disable buzzer beeps generated
when the projector is powered on/
off.
To turn off the power by pressing
the [t] button once.
Setting Methods
• When Direct Power On is set to On, the
projector can start projecting when power is
supplied. (Default value: Off)
s Extended - Operation - Direct Power
On p.125
• The projector can be powered off directly by the
breaker because it supports the direct shutdown
function.
Set Beep to Off. (Default value: On)
s Extended - Operation - Advanced - Beep
p.125
Set Standby Confirmation to Off. (Default value:
On)
s Extended - Display - Standby Confirmation
p.125

Settings related to display

Purpose
To change the menu position.
To change the menu direction.
To prevent the display of menus,
messages, or warnings on the
screen.
To disable the display of the
message on the projection screen
when switching the source.
To reduce the display delay of the
image.
To register and save the settings of
the projected image.
Setting Methods
Change the settings of Menu Position.
s Extended - Display - Menu Position
Change the settings of OSD Rotation.
s Extended - Display - OSD Rotation
Each time you press the [On-Screen] button on
the remote control, menus or messages and so on
are shown or hidden. While menus are hidden,
you cannot operate the Configuration menu
(except switching the color mode and input
source).
Set Messages to Off. (Default value: On)
s Extended - Display - Messages p.125
You can confirm warning by the display of the
indicator.
s "Reading the Indicators" p.148
Dialogs related to operations and behaviors, laser
warnings, termination of Message Broadcasting,
and projector ID are displayed.
Set Image Processing to Fast 1 or Fast 2.
s Signal - Advanced - Image Processing
p.121
Set Memory.
s "Memory Function" p.103
You can save the following settings.
• Memory: Some settings in the Configuration
menu
• Lens Position: Adjustment values of the lens
shift, zoom, focus, and distortion
• Geometry Correction: Adjustment value of the
geometry correction
40
p.125
p.125