Philips SENSEO HD7870 User Manual page 8

Tilt the water reservoir and place the bottom
5
back onto the machine (1). Then press the top
of the water reservoir towards the machine (2).
Remove the drip tray.
6
Place a bowl with a capacity of at least 1.5
7
litres under the coffee spout.
Make sure a pod holder, without pod or pods,
8
is in place.
8
Put the plug in an earthed wall socket.
9
Press the on/off button 3. The button lights
10
up to indicate that you have to flush the
machine.
To start flushing, press the 1-cup button q
11
and the 2-cup button qq briefly at the same
time.
The on/off button starts flashing to indicate
•
that the flushing cycle has started.
• During the flushing cycle, the boiler fills itself
with water from the water reservoir and
cold water comes out of the coffee spout.
During the flushing cycle, the machine
produces more noise than during a regular
brewing cycle.
• When all the water in the water reservoir
has been used up, the flushing cycle is
finished and the machine switches off.