9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc, radio or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly. (see 'Set clock' on page 12 )
2
Press POWER to switch to standby
mode.
3
Press and hold TIMER for more than 2
seconds.
A prompt to select the source is
»
displayed.
4
Press DISC 1/2/3 , or TUN or USB to
select a source.
5
Press TIMER to confi rm.
The clock digits are displayed and
»
begin to blink.
6
Press ALB/PRESET+/- to set the hour.
7
Press / to set the minute.
8
Press TIMER to confi rm.
The timer is set and activated.
»
To deactivate or re-activate an alarm timer
1
When the unit is turned on, press TIMER
repeatedly.
If the timer is activated,
»
If the timer is deactivated,
»
disappears.
Note
•
In MP3 link mode, the alarm timer cannot be set.
Tip
•
If disc/USB source is selected and the audio cannot be
played, tuner is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
To deactivate sleep timer
1
Karaoke
You can connect a microphone (not supplied)
and sing along with a music source.
1
2
3
4
is displayed.
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated,
»
displayed.
Press SLEEP repeatedly until [OFF] (off)
is displayed.
When sleep timer is deactivated,
»
disappears on the display.
Turn MIC LEVEL 1/2 to the minimum
level.
Connect a microphone to the MIC 1/2
jack of the unit.
Press DISC 1/2/3 , or TUN , or USB , or
MP3-LINK to select the source, and start
play.
Sing through the microphone.
•
To adjust the volume of the source,
press VOL +/- .
•
To adjust the volume of the
microphone, turn MIC LEVEL 1/2 .
is
EN
19